The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Inverter · 01-07-2010, 12:28 AM

figured out how to assemble hoses w/o marring up the fittings.

The front crossmember lays flat,then theres a slight positive rake.Thats how I like it.

The drivers side collector is a 1/4" from contacting the ground when aired out.After I ground 1/4" off the flange.

Template

01-07-2010, 12:28 AM	#167
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: my 98' Streetrod build figured out how to assemble hoses w/o marring up the fittings. The front crossmember lays flat,then theres a slight positive rake.Thats how I like it. The drivers side collector is a 1/4" from contacting the ground when aired out.After I ground 1/4" off the flange. Template __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484 Last edited by Inverter; 01-07-2010 at 01:00 AM.