[Jvsapp]

when i was doing some research into replacing the wood on my morris traveler, i was looking into having some boxed tube that i would construct the wood replacements out of wood grained. there's a couple sources out there that use a wood grain pattern on a roller. they put paint onto a wood grain pattern, then using a foam roller they transfer the pattern to the roller, then onto the metal. i'm not at the point yet of either ordering wood, or doing the boxed tube and getting it wood grained, but i would imagine it's an alternative. the sites i came across had the whole dash on some 40-50's full wood grained. and it looked real. if you like i can see if i can dig up some of the links i found.