The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sav300 · 01-14-2010, 09:44 PM

I am currently rebuilding a 71 Chevy 2wd long box with a new powerplant. It came with a stock 350 and here is what I've done so far.

Bored .030 over
Edelbrock Performer Intake
Keith Black Hypereutectic Pistons(10.2:1 w/ 64cc heads)
305 Heads(port and polished)
Edelbrock Performer Cam(No clue why I bought this, but I am going to upgrade once the motor is broke in. Lunati Voodoo to come.)
Scat 6" I Beam Rods
Forged Eagle crank
Edelbrock Double Roller Timing chain
Rochester 700CFM Carb
Flowtech Afterburner Headers
2.5" X-pipe exhaust with Flowtech Afterburner Mufflers
3.73 Gears
TH350 with 2800 stall

I plan to upgrade to Trick Flow or World heads with 58cc-64cc combustion chambers and 2.02 & 1.94 valves. Along with the Lunati Voodoo cam.

Hoping to make a good street/strip pickup. Tell me what you think!

Thomas

01-14-2010, 09:44 PM	#1
sav300 Registered User Join Date: Oct 2008 Location: Hermsiton, Oregon Posts: 100	Thoughts on my new motor build I am currently rebuilding a 71 Chevy 2wd long box with a new powerplant. It came with a stock 350 and here is what I've done so far. Bored .030 over Edelbrock Performer Intake Keith Black Hypereutectic Pistons(10.2:1 w/ 64cc heads) 305 Heads(port and polished) Edelbrock Performer Cam(No clue why I bought this, but I am going to upgrade once the motor is broke in. Lunati Voodoo to come.) Scat 6" I Beam Rods Forged Eagle crank Edelbrock Double Roller Timing chain Rochester 700CFM Carb Flowtech Afterburner Headers 2.5" X-pipe exhaust with Flowtech Afterburner Mufflers 3.73 Gears TH350 with 2800 stall I plan to upgrade to Trick Flow or World heads with 58cc-64cc combustion chambers and 2.02 & 1.94 valves. Along with the Lunati Voodoo cam. Hoping to make a good street/strip pickup. Tell me what you think! Thomas Last edited by sav300; 01-14-2010 at 10:03 PM.