Engine info
Bore - 4.060
Stroke - 3.480
Factory tolerances or set up more as a race motor? - factory tolerances
Electric Water pump? - no
Electric Fan? - yes
Head data:
*----* Intake and Exhaust Valve size - 1.94 1.50
*----* Head flow numbers (Please provide them or a link to MFG's website, I don't want to have to search for info. If these are stock heads, try to give me a casting or something) - 487 heads
Compression ratio - 9 to 1
Type of intake (Single plain, dual plane, again link if you can find it). - edelbrock performer rpm dual plane
http://www.edelbrock.com/automotive_...lds_main.shtml
Carb or TB (Is it a vacum carb?) - 650 mighty demon blow through
http://www.barrygrant.com/demon/default.aspx?page=14
Header Data:
*----* Tube Diameter - 1 3/4
*----* Tube length to collector (this can be your best guess, but the more accurate, the better) - 30 in
cam info:
Link to MFG's web page or cam card would be best but..
Duration at .050"
Total Lift and based on what rocker ratio
Intake centerline
LSA - i cant find anything on the cam so ill go with a diff one
heres a lunati voodoo
Advertised Duration (Int/Exh): 284/292
Duration @ .050 (Int/Exh): 241/249
Gross Valve Lift (Int/Exh): .525/.546
LSA/ICL: 110/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 2500-6600
What rocker are you using? -1.5 harland sharp
Blower/turbo? - 70mm .80 ar 10 psi
I need to know size and PSI you are running.
Intercooler? Air to Air or Air to water? - no intercooler
Vehicle Data (I am going to try to keep this simple and use my aero for the most part). - 1964 c10 short fleet
Total weight - guessing 3800
Front/Rear weight bias - ?
What trans you are running (Gear ratio if different than stock) - th 350 stock
Size converter (STR if you have it) - 2700 b & m 12 inch
Gear ratio - 3.73
Differential (Open, production posi, spool) - gov lock
Tire size (height, width and type, again if you have a link to the MFG's page, even better). - 275 60r15 mickey thompson et street radial
http://www.mickeythompsontires.com/s...ETStreetRadial