The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 cheyenne pdx · 01-25-2010, 06:42 PM

I replaced mine with a "custom" plate that houses (2) 3.5" speakers. It isn't hard to change out, but may test your patience. You will need to take out the OG radio if still in to get the speaker out. At least I wasn't smart enough get around it. What I did was take out the speaker and used it as a template and traced it on to 1/4" MDF board. Used the 3.5" speaker as another template to cut out the speakers in the MDF board. Painted the MDF board rattle can black and reinstalled it.

01-25-2010, 06:42 PM	#4
72 cheyenne pdx Registered User Join Date: Nov 2006 Location: Portland Posts: 382	Re: Dash Speaker I replaced mine with a "custom" plate that houses (2) 3.5" speakers. It isn't hard to change out, but may test your patience. You will need to take out the OG radio if still in to get the speaker out. At least I wasn't smart enough get around it. What I did was take out the speaker and used it as a template and traced it on to 1/4" MDF board. Used the 3.5" speaker as another template to cut out the speakers in the MDF board. Painted the MDF board rattle can black and reinstalled it.