The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

87 STEPPER · 01-25-2010, 10:45 PM

It's been a while but i think it's the EGR VLV silnoid it needs to be connected to the vaccum port on the lower rt front of the TBI base the one thats open in that pic.

You will have to go to a u-pick it junk yard and get one if you cant find one from a truck just get a section of that abs plastic hose with some bends in it that look close and the rubber tips and make it.

Or just use some regular rubber vaccum hose.

01-25-2010, 10:45 PM	#2
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: help identifying part It's been a while but i think it's the EGR VLV silnoid it needs to be connected to the vaccum port on the lower rt front of the TBI base the one thats open in that pic. You will have to go to a u-pick it junk yard and get one if you cant find one from a truck just get a section of that abs plastic hose with some bends in it that look close and the rubber tips and make it. Or just use some regular rubber vaccum hose. __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE Last edited by 87 STEPPER; 01-25-2010 at 10:50 PM.