The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 01-26-2010, 11:10 PM

if your existing lines are ok, then there's no real reason to replace them IMO.
If memory serves, I used three 5 foot sections when I redid the lines on my burb from the tank to the pump. I may have had a smaller section in there too, or maybe I trimmed off some of the last piece. I used some of the black line, and it bends SO easy. Made running the line to the contour in the frame 10 times easeir.

01-26-2010, 11:10 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: fuel lines for 67 c10 if your existing lines are ok, then there's no real reason to replace them IMO. If memory serves, I used three 5 foot sections when I redid the lines on my burb from the tank to the pump. I may have had a smaller section in there too, or maybe I trimmed off some of the last piece. I used some of the black line, and it bends SO easy. Made running the line to the contour in the frame 10 times easeir.