[tcb-1]

actually Chris, I do. us stepside/wood floor guys really have it quite easy.

1. remove all the bed wood/strip bolting
2. take the wood and metal strips out carefully. we'll be reusing those.....
3. remove the side angles and relocate 4" higher
4. install bed
5. place 4" c-channel on the 4 bed braces
6. redrill c-channel to accept the bed wood using the original mounting holes

going for the totally stock/stealth look.

I think I have a final design on how to mount the compressor/tank/and valves. still need to get the tank in to do a final mock up.