The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - My '46 Chevy Pickup

**Todd68Chevy** · 02-03-2010, 10:31 PM

Dan,
The rusty looking strip with the two hole is the center structural bow that fastens into the cab from door frame to door frame in the middle of the roof. The part with the 180 bend bolts to the rusty strip and yes the headliner slides into the groove. In the fourth picture that shows the ends, the hole in the gray part would screw to the little single hole in the rusty strip. There is also a strip in the rear that attaches to the rear panel around the back of the cab and window (not pictured). Then there is a front strip that attaches to the panel above the windshield (not pictured). Hope this helps but if you want more pictures or have more question please ask. Todd

02-03-2010, 10:31 PM	#43
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: My '46 Chevy Pickup - The Innaugural Pre '47 Thread! Dan, The rusty looking strip with the two hole is the center structural bow that fastens into the cab from door frame to door frame in the middle of the roof. The part with the 180 bend bolts to the rusty strip and yes the headliner slides into the groove. In the fourth picture that shows the ends, the hole in the gray part would screw to the little single hole in the rusty strip. There is also a strip in the rear that attaches to the rear panel around the back of the cab and window (not pictured). Then there is a front strip that attaches to the panel above the windshield (not pictured). Hope this helps but if you want more pictures or have more question please ask. Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.