The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

eagleuh1 · 02-07-2010, 07:22 AM

Might get the ebfabman videos as well. I'm going to order them on Monday seeing as I've never done body work before, other than slathering on the bondo or knocking out minor dents with hammer and dolly. They're oriented direct at our trucks, so better than learning from my own mistakes how not to do it. I have my own tig and can weld, but have never welded sheet metal like this, but going to give it a shot. Good luck with yours. PS, if you don't have all the tools already or the shop space, friend might be a better choice.

02-07-2010, 07:22 AM	#9
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Body work for a newb? Might get the ebfabman videos as well. I'm going to order them on Monday seeing as I've never done body work before, other than slathering on the bondo or knocking out minor dents with hammer and dolly. They're oriented direct at our trucks, so better than learning from my own mistakes how not to do it. I have my own tig and can weld, but have never welded sheet metal like this, but going to give it a shot. Good luck with yours. PS, if you don't have all the tools already or the shop space, friend might be a better choice.