The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

chipflyer · 02-07-2010, 05:20 PM

When I did mine I removed it from the truck, and assembled it on saw horses, squared it up, fit the wood, then removed the wood and finished it then painted the inside of the bed and front panel. After everything was dry I put it all back together on the saw horses and then moved it back to the truck where it fit perfectly. If you follow mar-k's instructions you can't really go wrong.

Mar-k bed instructions

Jeff

02-07-2010, 05:20 PM	#2
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Bed Installation When I did mine I removed it from the truck, and assembled it on saw horses, squared it up, fit the wood, then removed the wood and finished it then painted the inside of the bed and front panel. After everything was dry I put it all back together on the saw horses and then moved it back to the truck where it fit perfectly. If you follow mar-k's instructions you can't really go wrong. Mar-k bed instructions Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.