Quote:
Originally Posted by kwilson512
OKay...it seems to be running fine now...trouble is I didnt do anything new..I have the air filter off right now so I guess the only variable between now and two hours ago is that. Maybe the filter/housing is touching a bare wire or the wire is worn but just eyeballing it the wires seem okay. Could it be my original thought that water caused this in the first place and it took a couple days to dry out?...if so I need to get the inner fender in there asap bc there is alot of corrosion on the panel.
|
My problem had been intermittent for quite a long time too. First it ran fine most of the time, but would suddenly stall and not-restart. Then it got to where it wouldn't start most of the time. Now it almost never starts, but every so often, it'll start and run on a few cylinders.
So far, changing the plugs, wires, cap & rotor has been ineffective. Air cleaner assembly on or off doesn't make a difference.