Re: Power Window Wiring
Your fuse box doesn't have the stock spots for them to plug into since it is pre-77 when it became an option but you can put the older glass fuse type terminal ends onto the pink, black & orange wires so they can plug into spots on your older fuse panel that were meant for accessories if there are any with a high enough amp rating.
You will need a fused power source that is constant on and one that is ignition on hot for the pink & orange wires and the black one can be grounded to the body under the dash with the other grounds to the left of the speedo. If I remember right the pink is the constant on power and the orange is ignition on hot.
The large plugs connect to the door component connectors where they come through the kick panel from the door.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
|