Quote:
Originally Posted by playinsafe44
Can I wire in a 30 amp breaker without using the spade style fuse block?
|
Yes. I would use a 30A Bosch style relay
and an ATO style Circuit Breaker
Connect one side of the circuit breaker to the battery or or distribution point that is supplied by a heavy wire. The other side connect to terminal 30 of the relay. Terminal 87 will connect to the pink wire of the power window harness. The Orange wire of the harness is not used for the power windows but supplies the power door locks.
Connect terminal 86 of the relay to ground and 85 to a Ign/Acc source. (there should be a terminal on your stock fuse box you can use)
See a similar setup
here.