The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 2.5" drop spindles w/stock wheels question

DZL1 · 02-11-2010, 10:02 AM

Im running 15x8 rallies, bagged with 2.5 drop spindles. I did have to grind both the front side and the back side of each lower control arm. If your planing on bagging then you'll have to grind about 1/2" to 3/4" off the ends of your sway bar as they rub the bag. Hope this helps.

DZL1.

02-11-2010, 10:02 AM	#14
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 703	Re: 2.5" drop spindles w/stock wheels question Im running 15x8 rallies, bagged with 2.5 drop spindles. I did have to grind both the front side and the back side of each lower control arm. If your planing on bagging then you'll have to grind about 1/2" to 3/4" off the ends of your sway bar as they rub the bag. Hope this helps. DZL1.