The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - motor mount help/ S-10 swap

southbounddee · 02-11-2010, 10:52 AM

ok the info i got was it is about 5 1/4'' from the front leading edge of the cross member to the first hole on the block (where the mount bolts to the block).so i put my s-10 v8 motor mount on backwards and got 5''. now i was told you can't use s-10 v8 motor mounts they won't work. i'm really feeling if turn them around so the motor is pushed back instead of forward it will work..has anyone tried and faild?

02-11-2010, 10:52 AM	#3
southbounddee Registered User Join Date: Feb 2010 Location: Gainesville, fl Posts: 187	Re: motor mount help/ S-10 swap ok the info i got was it is about 5 1/4'' from the front leading edge of the cross member to the first hole on the block (where the mount bolts to the block).so i put my s-10 v8 motor mount on backwards and got 5''. now i was told you can't use s-10 v8 motor mounts they won't work. i'm really feeling if turn them around so the motor is pushed back instead of forward it will work..has anyone tried and faild? Attached Images Last edited by southbounddee; 02-11-2010 at 10:53 AM.