The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - S-10 swappers: how did you mount your running boards?

texas56 · 02-16-2010, 11:20 AM

We cut ours down and welded them to the stock frame. Had to shorten a couple and notch that front one around bodymount. This is only pic I have here with me today but will try and remember to get you more. This was VERY tricky to get all the sheetmetal gaps and aligned when we mocked it up. Took several trys.

02-16-2010, 11:20 AM	#7
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: S-10 swappers: how did you mount your running boards? We cut ours down and welded them to the stock frame. Had to shorten a couple and notch that front one around bodymount. This is only pic I have here with me today but will try and remember to get you more. This was VERY tricky to get all the sheetmetal gaps and aligned when we mocked it up. Took several trys. Attached Images __________________ 1955 First Series Thriftmaster Blown 355 TH400, S10 Chassis,narrowed 9 Inch rear, air ride, 4 wheel disc brakes, 20s and 22s,