The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WIW '66 Chevy 3/4 axle, crossmember, wheels, tires, complete

GMCMG · 02-19-2010, 01:14 PM

I have a complete setup off my '66 3/4 ton frame I am wanting to sell, and would like to know what is reasonable. I had been looking to sell these as a complete set, but am willing to break it all up (a guy stopped by a while ago wanting to buy rims/tires).
I don't know what the gearing is in the rear end, but would be willing to figure out if that makes a value difference. It is an open rear end. See pics. Thanks for any input. Oh, I haven't cut any brackets off the axle, though I did accidentally cut one of the brake lines when cutting the u-bolts to remove it from the trailing arms (replace 'em anyway...).

02-19-2010, 01:14 PM	#1
GMCMG Registered User Join Date: Nov 2009 Location: Center, MO Posts: 121	WIW '66 Chevy 3/4 axle, crossmember, wheels, tires, complete I have a complete setup off my '66 3/4 ton frame I am wanting to sell, and would like to know what is reasonable. I had been looking to sell these as a complete set, but am willing to break it all up (a guy stopped by a while ago wanting to buy rims/tires). I don't know what the gearing is in the rear end, but would be willing to figure out if that makes a value difference. It is an open rear end. See pics. Thanks for any input. Oh, I haven't cut any brackets off the axle, though I did accidentally cut one of the brake lines when cutting the u-bolts to remove it from the trailing arms (replace 'em anyway...). Attached Images __________________ GMCMG 1964 GMC 1/2 ton LWB project - 1982 GMC 6.2 diesel engine/suspension donor - 1966 Chevy 3/4 ton frame/doors/fenders donor - tons of parts - cause you can't build a truck without 4 of everything! 2001 3/4HD Duramax Diesel extended cab lwb4x4 1984 Chevy C30 6.2 diesel lift truck (project) 1962 GMC w/5 lugs, 350/350 auto (was for parts, but couldn't bring myself to do it!) glascock.m@hotmail.com