|
project Daisycutter update.....after POR-15
Here's a couple of pics after I put on 2 coats of POR-15 on the rear of the chassis. Came out nice and slick. Now to put on a coat of the ChassisCoat paint for a topcoat.
Notice large black spot on driveway where I knocked the freakin' can of POR-15 over; that was expensive... 
I plan on cutting that left rear exhaust hanger off, so I didn't paint it.
Just waiting on the rebuilt rear end so I can POR-15 it, then I can assemble the rear of the frame/suspension, move the bed back to its mounts, then repeat the whole process for the front of frame.
Complete frame and suspension should be done by the end of May.
Off to the bodyshop in June.
Now to go cut the drips of POR-15 out of my hair......SC
__________________
'68 CST SWB factory 396/T400
buddy buckets, a/c, ps, pb
'72 Corvette convertible 454/4spd/ac, ps, pb
'73 GMC Sierra Grande short wide 454/T400 ps, pb, ac
'77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original
'78 GMC Sierra Classic short wide 454/T400 ps, pb, ac
'72 GMC Sprint SP454. 1 of 38 built.
'73 GMC Sprint SP454. 1 of 71 built.
'75 GMC Sprint SP454. 1 of 25 built.
SOLD! '72 GMC K25 4x4 468/4L80e/NP205
build thread
http://67-72chevytrucks.com/vboard/s...23#post4324423
SOLD!'55 Chevy gasser 496/4spd
build thread
http://67-72chevytrucks.com/vboard/s...96#post4324396
|