The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*vegaschevy* · 02-24-2010, 09:45 PM

Heres a little better info on easy wasy... the EASY button.. LOL

jack stand the frame like mentioned. High enough that you can get an impact wrench under the trailing arm.

put a jack under the pumpkin or whatever side you are removing first. Jack it up to relieve a little pressure and remove the bottom bolt. Then lower the rear end and youll have more room to get to the top bolt! repeat for the other side.

02-24-2010, 09:45 PM	#7
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Replacing rear coils Heres a little better info on easy wasy... the EASY button.. LOL jack stand the frame like mentioned. High enough that you can get an impact wrench under the trailing arm. put a jack under the pumpkin or whatever side you are removing first. Jack it up to relieve a little pressure and remove the bottom bolt. Then lower the rear end and youll have more room to get to the top bolt! repeat for the other side.