The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Inverter · 03-01-2010, 04:31 AM

Dave,
I did a 3/5 on my '04. My install used an aluminum block in the BJ pocket (to b used w/oem wheels)so drilling out those rivets was a Pita. Don't know if you have that same spindle. Other than that, it wasn't bad at all.
The spindles on the 88-98s are much easier, not having the hub n all ,so the NBS's are more work.
~T.

03-01-2010, 04:31 AM	#2
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: McGaughy 4/6 install on 05' Dave, I did a 3/5 on my '04. My install used an aluminum block in the BJ pocket (to b used w/oem wheels)so drilling out those rivets was a Pita. Don't know if you have that same spindle. Other than that, it wasn't bad at all. The spindles on the 88-98s are much easier, not having the hub n all ,so the NBS's are more work. ~T. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484 Last edited by Inverter; 03-01-2010 at 04:36 AM.