Yes you can use the spindles, rotors, calipers, outer tie rods, etc as well as the upper and lower ball joints from the '88-'98 trucks with the C20 control arms on your truck. I'm not positive the upper ball joint will fit the control arms but about 90% sure. Would need to verify it.
Here is another thread with some info on this swap. This one is mainly focused on the 6 lug rotors, but the 5 lug rotors fit the same spindle.
http://www.67-72chevytrucks.com/vboa...ad.php?t=35042
Quote:
Originally Posted by panelrodder81
I must have missed all of this in that thread as I have been over it a couple times, will revisit. So just to recap, if I use the spindles and associated brake parts from the later, 88-98, trucks then I can do this for cheap... cheaper? I'm assuming I need the ball joints from the same year as the donor truck... obviously.
|