The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mobileortho · 03-02-2010, 09:07 PM

I have one on my 3600. I took the IFS from a '79 and narrowed it about an inch & a half and bolted it right in. Also added a set of dropped spindles and cut off 1 1/2 coils. Pictured are 16x7 Torq Thrust II's but I've purchased a set of 17x7 for the front & 17x11 for the rear. I also recently acquired some lower tubular A arms that I'll get around to when I recoup( prostate cancer). Hope that helps.

03-02-2010, 09:07 PM	#10
mobileortho Registered User Join Date: Sep 2008 Location: Hampton, VA Posts: 913	Re: C10 front end under an AD Chevy truck I have one on my 3600. I took the IFS from a '79 and narrowed it about an inch & a half and bolted it right in. Also added a set of dropped spindles and cut off 1 1/2 coils. Pictured are 16x7 Torq Thrust II's but I've purchased a set of 17x7 for the front & 17x11 for the rear. I also recently acquired some lower tubular A arms that I'll get around to when I recoup( prostate cancer). Hope that helps. __________________ Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making.