The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mobileortho · 03-03-2010, 06:51 PM

The only problem I've had was having it too low as seen in the previous set of pictures. I had installed a set of 3" dropped coils to go along with the dropped spindles. While it looked great, the scrub line was way too low. The lower control arms were less than 2" off the ground, rendering it unsafe. I switched back to the cut coils. Other than that it drives great!

03-03-2010, 06:51 PM	#24
mobileortho Registered User Join Date: Sep 2008 Location: Hampton, VA Posts: 913	Re: C10 front end under an AD Chevy truck The only problem I've had was having it too low as seen in the previous set of pictures. I had installed a set of 3" dropped coils to go along with the dropped spindles. While it looked great, the scrub line was way too low. The lower control arms were less than 2" off the ground, rendering it unsafe. I switched back to the cut coils. Other than that it drives great! __________________ Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. Last edited by mobileortho; 03-04-2010 at 06:59 PM.