|
Re: $500 bucket
Alittle progress! bolted my cab back on to see how it would be affected by the bodydrop. Had to make a little slice for the PB trailing arm crossmember to get the cab to rest on the mounts. The pinch weld on the bottom of the rockers now holds my frame a half inch off the ground! I removed my stock trailing arms, (PB arms to come!) and put my rearend on top of the frame rails. My 20 inch rims still touch the ground. But found out my Kp notch is only tall enough for that. I wanna run 22's or 24's so PB notch to come!
Tony from Norcal
|