The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 Long · 03-07-2010, 10:41 PM

My filler nozzle does not clear the frame. It looks like yours is up high enough that you can get a hose on it. The very first pic I posted shows the tank flange under the frame while the nozzle just barely touches the top of the frame. If I cut the nozzle back, it will be opening directly into the frame channel. It just looks like that the top half of the tank is shorter than the ones people are buying...

03-07-2010, 10:41 PM	#3
72 Long Registered User Join Date: Jan 2010 Location: Melbourne, Florida Posts: 12	Re: Gas Tank Relocation Problem My filler nozzle does not clear the frame. It looks like yours is up high enough that you can get a hose on it. The very first pic I posted shows the tank flange under the frame while the nozzle just barely touches the top of the frame. If I cut the nozzle back, it will be opening directly into the frame channel. It just looks like that the top half of the tank is shorter than the ones people are buying...