The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 Long · 03-07-2010, 10:56 PM

I certainly could do that. I measured the height of the frame and the channel is about 4.5 inches. In the pic I posted with the ruler, the distance between the filler neck base and the flange is about 3 inches. You can see that it's not possible to get the tank closer to the frame channel because of the filler neck. I'm wondering what the neck-to-flange dimensions are on the other tanks I see people installing....

03-07-2010, 10:56 PM	#5
72 Long Registered User Join Date: Jan 2010 Location: Melbourne, Florida Posts: 12	Re: Gas Tank Relocation Problem I certainly could do that. I measured the height of the frame and the channel is about 4.5 inches. In the pic I posted with the ruler, the distance between the filler neck base and the flange is about 3 inches. You can see that it's not possible to get the tank closer to the frame channel because of the filler neck. I'm wondering what the neck-to-flange dimensions are on the other tanks I see people installing....