The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cparman · 03-08-2010, 07:01 PM

Check to be sure that you do not have spark at the spark plug. If you do not have a spark tester, just use a screwdriver. Put the end of the screwdriver in the end of the spark plug wire and find a convenient place to ground the screwdriver. IF you have no spark, check to see if you have 12v+ at the wire where it connects to the dizzy. IF you have 12v+ at the dizzy the trouble is inside the dizzy.

03-08-2010, 07:01 PM	#14
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: Troubleshooting Assistance Please... Check to be sure that you do not have spark at the spark plug. If you do not have a spark tester, just use a screwdriver. Put the end of the screwdriver in the end of the spark plug wire and find a convenient place to ground the screwdriver. IF you have no spark, check to see if you have 12v+ at the wire where it connects to the dizzy. IF you have 12v+ at the dizzy the trouble is inside the dizzy.