The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mbgmike · 03-13-2010, 05:35 PM

The only differance I know is that the holes in the frame mounts are smaller on the 60-66 they are just under 1.1/4 the later years like 1.1/2" you would have to enlarge the hole to get the bushing to sit correct in the hole, The rubber donuts are the same height. Think you will have to change two bolts cause i think the 60-66 are shorter a little bit.

03-13-2010, 05:35 PM	#3
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Cab Bushings The only differance I know is that the holes in the frame mounts are smaller on the 60-66 they are just under 1.1/4 the later years like 1.1/2" you would have to enlarge the hole to get the bushing to sit correct in the hole, The rubber donuts are the same height. Think you will have to change two bolts cause i think the 60-66 are shorter a little bit. Last edited by mbgmike; 03-13-2010 at 05:38 PM.