The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**SOON2BLAZE** · 03-14-2010, 07:47 PM

Well I crawled under her today to see what looked best. 2wd with a 4/6 drop doesn't leave much room. I have a half cab, but usually run it topless. I'm going to put a ECE trailing arm crossmember in it this week to get some drive shaft clearance and run the exhaust through. thinking I might try to put the mufflers where the stock one was and dump behind the rear tire. Once it gets on the lift at the muffler shop it will be easier to determine. Like I said not much room under there. 2 flow masters are going to be a tight fit. Thanks for all the info.

03-14-2010, 07:47 PM	#14
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 907	Re: Exhaust exits and tips pic needed Well I crawled under her today to see what looked best. 2wd with a 4/6 drop doesn't leave much room. I have a half cab, but usually run it topless. I'm going to put a ECE trailing arm crossmember in it this week to get some drive shaft clearance and run the exhaust through. thinking I might try to put the mufflers where the stock one was and dump behind the rear tire. Once it gets on the lift at the muffler shop it will be easier to determine. Like I said not much room under there. 2 flow masters are going to be a tight fit. Thanks for all the info.