|
Re: 63 We are bagging and tubbing at the shop..
Quote:
Originally Posted by SCOTI
The math worked out for an un-narrowed housing too. I reviewed the pics & you can tell visibly that there's a pretty good gap between the outside tire edge & the inner bed wall indicating that the housing was narrowed.
Any change planned for the rears or just going as is?
|
Actually when narrowed the rear the plan was to run a 20x15 with a bigger tire but the measurments were TIGHT on the front of the wheel opening on the bedside... We were going to move the rear end housing back to center the wheel and give us more space but really didn't want to cut apart the new street challenge kit so we went with the 20x12.... We either get the wheel re-hooped or just run a spacer....
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08
67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast.
64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten..
54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread...
07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind..
http://67-72chevytrucks.com/vboard/s...d.php?t=339340
See pics of my trucks in my profile
|