Quote:
Originally Posted by lolife99
If the rearend looks crooked,... make sure you have the leaf springs installed correctly. The center pin is offset in the leaf spring. Sounds like you have one in backwards.
This is easy to do. I had both in backwards one time,... and didn't realize it until I tried to install the driveshaft. It wouldn't go in.
(The rearend was too far forward)
I had to take everything apart and turn the leaf springs around.
|
I have never done this my self, but this sounds like the most likely culprit to me. I would definatly check and make sure before you cut your drive shaft down.