The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**John Fabris** · 03-21-2010, 04:21 PM

I have that kit on my 67. I like the stance, running 265/60/15 on 15x8 wheels.

Pretty easy kit with some minor work needed to remove old shock hangers (rivits).
I did not use a cnotch.
In my opinion, as I drive this truck more and more, I feel the front is too low for most bad roads around the bay area. I do bottom out every now and then on the inner ends of the lower a-arms. So, while it looks good, I would run the 3/5 drop for daily driver unless your roads are in very good shape.

03-21-2010, 04:21 PM	#9
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: early classic 4/6 drop kit I have that kit on my 67. I like the stance, running 265/60/15 on 15x8 wheels. Pretty easy kit with some minor work needed to remove old shock hangers (rivits). I did not use a cnotch. In my opinion, as I drive this truck more and more, I feel the front is too low for most bad roads around the bay area. I do bottom out every now and then on the inner ends of the lower a-arms. So, while it looks good, I would run the 3/5 drop for daily driver unless your roads are in very good shape. __________________ John Fabris 67 C10 SWB