|
oK, even after you flip your tranny cross member, raise the crossmember, move the gas tank, use tubular upper and lower control arms, raise the steering - you still are only going to lay frame. Trust me, I have doen all these things, and my truck lays flat on the frame - which puts the rockers about an 1-1/4" off the ground. Also - I'm running a 9" notch in the rear on a 27" tall tire and I have about 3-4" left before the axle hits. So really no need for that 10" notch at all, unless you really want to tuck some huge meat.
chuck
|