The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67 c-20 in Nebraska

corcor67 · 03-29-2010, 10:42 AM

Thanks monte...

Got the engine pulled and stripped yesterday. Turns out there were no broke connecting rods. I did finally answer that age old question I know we all have muttered to ourselves "What's that noise coming from?" I lost all my main cap bearings and 5 or 6 rod bearings. The knock I placed on a broke connecting rod was actually where one connecting rod wore a 1/8" groove into the crank. Cylenders don't seem too scared up but I want to make sure they are still round. Good news is the block is only .020 over so there is still room to bore.

03-29-2010, 10:42 AM	#11
corcor67 Registered User Join Date: Mar 2010 Location: Hastings, NE Posts: 18	Re: 67 c-20 in Nebraska Thanks monte... Got the engine pulled and stripped yesterday. Turns out there were no broke connecting rods. I did finally answer that age old question I know we all have muttered to ourselves "What's that noise coming from?" I lost all my main cap bearings and 5 or 6 rod bearings. The knock I placed on a broke connecting rod was actually where one connecting rod wore a 1/8" groove into the crank. Cylenders don't seem too scared up but I want to make sure they are still round. Good news is the block is only .020 over so there is still room to bore.