[chrismoore701]

So here is the latest, went back to the junk yard and found a blazer, not sure what year, but the only thing that had a door like mine so I bought it, $20 had to talk them down from $30. Anyways here is the new problem. you are looking at the driver side fender (I am not using this fender, it is the old one) quick story, I have dual tanks and this is the odd side. I bought a bed a while back w/ only one door on the passenger side. If you look close at the first pic you can see the thumb notch on the lower right. the new panel has the thumb notch on the upper right. this is the only way I can mount it to have to door open properly. There are no other trucks up here with that door, and even if there were, I am guessing none are going to have the odd door. What should I do? just mount it facing up? not the end of the world. I thought about cutting the corners out and swapping them but the stamp is not the same on top as it is on the bottom. As far as I can see any panel will fit the stepside bed, including a van, but there is nothing from the 70's or 80's up here. Ecu Pirate, thanks for the offer, anything I can ever do for you, just let me know