|
Re: '63 GMC Project
Quote:
Originally Posted by ruffrida2005
Let me know how far you set your axle from the rear cab mounts at ride height. I believe it's 56". I'm going to set my pinion at ride height, then drop it to the ground before I mount the bags. I'm not going to run very much air in the rear to lift it. I hope I'm going in the right direction.
|
Well I Measured the distance from the axle to the cab mount for you but unfortunately I measured from the 3/4 ton mounts and not the 1/2 mounts and the 3/4 ton mounts look a little wider, sorry. It was close to 56" like you said but we moved my axle back a little to split the differenced between the wheelbase at ride hieght and laying out. My lower links are about 35-3/8" from bolt center to bolt center. that may change when the pinion is completely dialed with a driveshaft in it.
__________________
((..))
((0))
'63 GMC lwb, 383, th350, lays frame, genuine patina.
The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267
'88 Astro cargo bagged, shaved, phantom grille. *SOLD*
'50 Chevy 2 door sedan awaiting attention.
2014 Silverado Ext cab, 5.3, daily driver.
|