View Single Post
Old 04-03-2010, 05:06 PM   #1
GOPAPA
Registered User
 
GOPAPA's Avatar
 
Join Date: Oct 2007
Location: Nampa Idaho
Posts: 7,645
Penetrating Oil and Its Worth

Machinist's Workshop magazine actually tested penetrants for break
out torque on rusted nuts. Significant results! They arranged a subjective
test of all the popular penetrants with the control being the torque
required to remove the nut from a "scientifically rusted" environment.

Penetrating oil Average load

None ..................... 516 pounds

WD-40 .................. 238 pounds

PB Blaster ..............214 pounds

Liquid Wrench ...... 127 pounds

Kano Kroil ............ 106 pounds

ATF-Acetone mix... 53 pounds

The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone.

Note: The "home brew" was better than any commercial product in this
one particular test. A local machinist group mixed up a batch and all now
use it with equally good results. Note also that "Liquid Wrench" is about as
good as "Kroil" for about 20% of the price.

Anyone have any personal experience backing up these claims?
GOPAPA is offline   Reply With Quote