Quote:
Originally Posted by 1970FathomBlueMalibu
I would like to try a set of 285/70/17's. I know that 265/70/17's will fit with a decent amount of room. This is for the Mickey Thompson Baja ATZ Radials.
I'm not using any spacers. Is that something I need to look into?
I just want to make sure that there is no issue with a full turn of the wheels or really any fitment issues at all. I really don't want to put on a lift kit for this truck, since it's a 2WD. I just have fairly rough terrain to go over every day, since I live in a rural area, plus I'd like to fill up the wheelwell as much as I could.
33X11.50R17 is the advertised specs and 32.8" diameter, as measured by Mickey Thompson.
Section width is 11.4".
Tread width is 9.1".
Thanks!
|
Your going to need a spacer lift or your going to trash the tire/fender with those tires.
My tires are very similar in dimension and the 2.5" spacer works well(no rubbing). I installed it myself in about 1.5 hours in the garage.
http://www.ccmoffroad.com/shop/index...ct_detail&p=23