The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

WestButteTruck · 04-09-2010, 09:28 PM

I have a used Demon 650 with vacuum secondaries that will need a rebuild. I took it off a running 84 with a 350 but I'm not sure the secondaries were working. Electric choke, however it would stick from time to time. Had it hooked to a 700R4 but I'm not sure the linkage was correct. At any rate, I ran it for over a year until I replaced with an edelbrock. AS IS $100 plus the ride. No PM's. I will try and do my best to answer any questions.

SOLD pending payment to FOREVER71, thanks

04-09-2010, 09:28 PM	#1
WestButteTruck Kung Fu Master Join Date: Oct 2005 Location: Montana Posts: 547	Used Demon 650 carb I have a used Demon 650 with vacuum secondaries that will need a rebuild. I took it off a running 84 with a 350 but I'm not sure the secondaries were working. Electric choke, however it would stick from time to time. Had it hooked to a 700R4 but I'm not sure the linkage was correct. At any rate, I ran it for over a year until I replaced with an edelbrock. AS IS $100 plus the ride. No PM's. I will try and do my best to answer any questions. SOLD pending payment to FOREVER71, thanks Attached Images __________________ 72 GMC SuperCustom 4x4 1972 Chevrolet Cheyenne Super 4x4 Last edited by WestButteTruck; 04-11-2010 at 12:39 AM.