[molinehotrod]

first i dr.opped it traditionally with springs, spindals, blocks. Next i cut the drop spings in the front. Then i cut the front cross member and slid it up in the frame two inchs. Then I narrowed the stock a arms an inch and a half per side. Then I c notched the frame in front for the steering to clear. Then I built new motor mounts 2 inches up. then I built a new trans crossmember to clear the three inch exhaust and move trans up. Then I built a new trailing arm mount to clear three inch exhaust and to keep from hanging below the frame rails. Then i z'd rear frame 4 1/2 inches and then did an in the frame c notch, Then changed the shock mount cross member. Now i have a one inch rake and a 26.5 front tire and a 32 inch rear tire while achiving the look I wanted.