The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OrrieG · 04-10-2010, 07:45 PM

Here is a shot of the filter. I will probably get a braided stainless hose between the filter and pump. Post 246 shows the filter and the fuel pump.

I don't know the NAPA part numbers but they come in lengths from 12" to 72" in about one foot increments. Looking at the photo I need to go out and make sure I put a nut on that bottom bracket bolt!

update: here is a link to the tubing on NAPA's online catalog. The last two numbers in the part number is the length in inches.
http://www.napaonline.com/Search/Det...620_0076392459

04-10-2010, 07:45 PM	#253
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Lurker OrrieG Progress Pics Here is a shot of the filter. I will probably get a braided stainless hose between the filter and pump. Post 246 shows the filter and the fuel pump. I don't know the NAPA part numbers but they come in lengths from 12" to 72" in about one foot increments. Looking at the photo I need to go out and make sure I put a nut on that bottom bracket bolt! update: here is a link to the tubing on NAPA's online catalog. The last two numbers in the part number is the length in inches. http://www.napaonline.com/Search/Det...620_0076392459 Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project Last edited by OrrieG; 04-10-2010 at 07:53 PM.