The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**bigdon-70blazer** · 04-11-2010, 04:34 PM

My heat gauge on the instrument cluster does not seem to work now, did before the rebuild. The needle is pegged over past the hot area when I turn the key on but stays over there all the time unless I unhook it under the hood. Any simple fixes here? I did try to take some wire and ground it separately but no help. Any gurus know about this? I changed the original cluster lens and bezel and cleaned the rest very carefully. Help ! but almost done!

04-11-2010, 04:34 PM	#1
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Heat gauge question My heat gauge on the instrument cluster does not seem to work now, did before the rebuild. The needle is pegged over past the hot area when I turn the key on but stays over there all the time unless I unhook it under the hood. Any simple fixes here? I did try to take some wire and ground it separately but no help. Any gurus know about this? I changed the original cluster lens and bezel and cleaned the rest very carefully. Help ! but almost done!