[rsavage]

Yes, you can remove them as one piece, but it is very difficult to reinstall the panels in the bows when they are one piece. You can get one side but then the next panel becomes very difficult to get into the slot. Perhaps with a bunch of hands. I did mine by myself and needed to have the plastic bows off to reinstall. Good luck - it's a frustrating operation. My Burb had a green vinyl over the driver's seat area that was glued to the inside of the roof. I scraped the glue off and sprayed it with a rust stop type of product - also sprayed down in the roof pillar and double wall area as long as it was open.