The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Marv D · 04-20-2010, 06:54 PM

Are you pulling timing out for the giggle gas? are you using plenty of octane for the enrichment fuel? Stepping plugs 1 step colder (than optimum for n/a ) for every 50HP of N2o?

I'm not a fan of the Edelbrock pumps, and DEFINATELY not a fan of deadheading a N2o system. But plenty do it and get by so what do I know,, I gave up the giggles over a decade ago. Lot's has changed since then.

One thing I do see that would never get by tech here,, the cell MUST have a metal (0.023 steel or 0.060 aluminum as I recall) shield on ANY portion of a poly cell exposed below the floor (trunk / bed or whatever).

04-20-2010, 06:54 PM	#3
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Fuel System Help Are you pulling timing out for the giggle gas? are you using plenty of octane for the enrichment fuel? Stepping plugs 1 step colder (than optimum for n/a ) for every 50HP of N2o? I'm not a fan of the Edelbrock pumps, and DEFINATELY not a fan of deadheading a N2o system. But plenty do it and get by so what do I know,, I gave up the giggles over a decade ago. Lot's has changed since then. One thing I do see that would never get by tech here,, the cell MUST have a metal (0.023 steel or 0.060 aluminum as I recall) shield on ANY portion of a poly cell exposed below the floor (trunk / bed or whatever). __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.