The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ubtripn · 04-26-2010, 04:38 PM

Hi there, I'm sure that you will receive a lot of good technical advice that is better than mine but I have learned one thing from past vehicles and that is that replacing the Idler arm can take out a ton of play and doing so gives a lot of bang for the buck. Of course there are other steering/front end components one can go through as well but simply doing this one thing has turned cars from undriveable to drivable for me.

04-26-2010, 04:38 PM	#2
ubtripn Registered User Join Date: Apr 2010 Location: Boise, ID Posts: 1,280	Re: How to I reduce slack in steering? Hi there, I'm sure that you will receive a lot of good technical advice that is better than mine but I have learned one thing from past vehicles and that is that replacing the Idler arm can take out a ton of play and doing so gives a lot of bang for the buck. Of course there are other steering/front end components one can go through as well but simply doing this one thing has turned cars from undriveable to drivable for me.