The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project started Saturday

propanemudtruck · 04-27-2010, 07:06 AM

Started with my donor frame - 86 K10 Longbed

Stock Leaf Springs

Donor Leaf packs / 86 10 bolt w/ 4.10 gears swapped in

Frame marked to cut

Donor rear axle with leafs - 86' 14 bolt / 4.10 gears

Rough cuts lined up - Cleaned up edges following the straight edge, clamped frame in place and welded.

Engine installed - 86 350, .443" lift & 212° duration cam, new lifters, pushrods, rockers, and valve seals. Edelbrock performer intake, 1405 Carb and Hooker Headers

04-27-2010, 07:06 AM	#12
propanemudtruck Local Redneck Authority Join Date: Mar 2009 Location: Grand Rapids, MI Posts: 584	Re: Project started Saturday - What year is this truck??? Started with my donor frame - 86 K10 Longbed Stock Leaf Springs Donor Leaf packs / 86 10 bolt w/ 4.10 gears swapped in Frame marked to cut Donor rear axle with leafs - 86' 14 bolt / 4.10 gears Rough cuts lined up - Cleaned up edges following the straight edge, clamped frame in place and welded. Engine installed - 86 350, .443" lift & 212° duration cam, new lifters, pushrods, rockers, and valve seals. Edelbrock performer intake, 1405 Carb and Hooker Headers Last edited by propanemudtruck; 04-27-2010 at 08:31 AM.