|
Re: How much cam is too much cam for power brakes
Its a lunati 60212.
Hydraulic roller, lopey idle. High performance street cam. Likes upgraded intake, carburetor and exhaust system. Needs 2800 RPM or better stall speed converter, 9.75:1 compression ratio and 3.55-3.73 rear gears.
Advertised Duration (Int/Exh): 282/290
Duration @ .050 (Int/Exh): 231/239
Gross Valve Lift (Int/Exh): .600/.600
LSA/ICL: 110/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 2200-5800
Includes: Cam Only
Part Number: 60212
__________________
Kevin
Special Thanks to All who have helped on the TRUCK!
My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4
So Far my best Times are:
Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83
Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
|