|
Re: How do I tell if this is good and working?
i had a problem with mine-it didn't pull vacuum to keep the heater valve closed. I found the end of the vacuum line just hanging down and upon furhter investigation, found the orface port it was attached to was full of road dust. I took a very small drill bit and by hand was able to clean out that three position diverter, then I ran vacuum line while the unit was hanging down to check the system for function. One mistake I made was using too large vacuum hose-I now have the correct diameter hose and all is working fine.
__________________
Steve
69 3/4t custom camper
tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c
67 Camaro
96 Impala ss-sold
04 hybrid Honda-saving gas for the blue truck!:b69:
|