The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

texastrendz · 05-08-2010, 01:27 PM

yes the caps should seat like the first pic. the only shaft that i found that would work correctly when i did mine was by the moog company. all the others would bind on the way in. yes i did make sure the caps threaded in all the way before i put the shaft in. you need to see if it is the cap or the shaft that is the problem. this is why i have no converted to the 73-87 arms. i feel your pain.

05-08-2010, 01:27 PM	#2
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Lower control arm shaft caps yes the caps should seat like the first pic. the only shaft that i found that would work correctly when i did mine was by the moog company. all the others would bind on the way in. yes i did make sure the caps threaded in all the way before i put the shaft in. you need to see if it is the cap or the shaft that is the problem. this is why i have no converted to the 73-87 arms. i feel your pain.